SOLARPack 410 Solar-Powered Single Run Flow Computer

Source: Schneider Electric, Telemetry & Remote SCADA Solutions

Designed for use in remote locations where solar is the only power and technician access is less than ideal, the SolarPack 410 incorporates a dedicated single run flow computer, solar/battery power supply and communication system within an all-in-one, compact, easy- to- install package.

Details

Click Here To Download:
•SOLARPack 410 Solar-Powered Single Run Flow Computer Datasheet
•Telemetry & Remote SCADA Solutions Line Card - General
•Telemetry & Remote SCADA Solutions Line Card - Oil & Gas

Sensor readings are taken each second, allowing the user to measure any anomalies that may have occurred such as compressor pulsations on the flow line or plunger movement within a well. With integrated Bluetooth wireless technology the 410 becomes the ultimate in walk-up SCADA, and when used in conjunction with a spread spectrum radio and ClearSCADA's custom EFM object the SolarPack 410 becomes a complete electronic flow measurement system.

The SolarPack 410 offers a cost-effective solution for natural gas producers and gatherers to replace their chart recorders. At sites with minimal access, SCADA hosts such as ClearSCADA and RealFLO can make use of an optional integrated Trio K-Series or FreeWave 900MHz spread-spectrum radio or other third-party radio. Now part of a network, the SolarPack 410 becomes an integral part of a complete EFM SCADA system.

The corrosion resistant aluminum enclosure is rated Type 3RX and can be installed on a standard 2" pipe. It can also be mounted on a wall, installed with optional Unistrut hardware or supported on the pipeline infrastructure by the sensor itself. For installations where gas flow calculations are not enough, the SolarPack 410 provides extra I/O: a turbine input that accumulates flow such as water condensate production, and a flow-proportional digital output that can trigger a third-party gas sampler.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

Ask a question.
Request more detailed information or literature.
Discuss your current project/application.
Request a quote.
Locate a distributor in your area.
Schedule a demo.