This program starts with the well open and the chemical pump off until the flowrate drops below the setpoint. Once below the setpoint, the well is closed and the slug and pump run times are calculated.
By KROHNE, Inc.
A North Carolina-based specialty chemical manufacturer, a major producer of insect repellent, was looking for a better way to measure the liquid level in its glass-lined agitated reactor. The company uses a number of complex technologies to manufacture sebacates, adipates, isophthalates, catalysts, alkyds, and other natural and renewable chemistries based on castor and citrates.
The Fox Model FT3 measures two important process variables with a single instrument, providing isolated 4 to 20 mA and pulse outputs for flow rate, and a 4 to 20 mA pulse output for process gas temperature or a second flow rate output.
One of the interesting attractions that make working with the oil and gas industry so enjoyable is that the industry as a whole thrives on the development and implementation of new technologies to solve their challenging problems and improve operations. It is widely accepted now that innovations in directional drilling and multi-stage fracturing technology have secured the North American gas supply for many decades to come, due to the significant increases in production from shale gas wells.
The new Ashcroft Model GC31 is a uniquely compact pressure sensor, ideal for monitoring pressures in hydraulic presses/stamping equipment and lifts, tire vulcanization, cooling and lubricating systems, alarm/control and pressure monitoring where consistent, reliable, pressure measurement is essential.
The Water Quality Virtual Tradeshow is Back!
The leaders in Water Quality are bringing their customers together again for a free virtual tradeshow to LEARN the latest trends and applications in water quality, CONNECT with peers worldwide about the hottest topics in water quality, and ENGAGE with water experts to overcome the toughest challenges in water quality. REGISTER NOW to attend exciting sessions led by industry experts on Municipal, Industrial and Environmental Water from your desk!
Offering on-site results in an easy-to-use, rugged, portable lab, Hach's Hydraulic Fracturing Water Analysis Kit covers parameters critical to water analysis in oil and gas applications, including source water, fracturing fluid, produced water, flowback water, water treatment, drilling fluids, and enhanced oil recovery.
You need to operate your furnace safely and at top efficiency, while producing the lowest amount of pollution in the form of NOx/greenhouse gas pollutants. The OCX8800 O2 Flue Gas Analyzer can help you do that. Typical applications include: refinery process heaters; power/utility boilers; petrochemical reactor furnaces; small package hot water/steam boilers and waste fuel boilers & incinerators. Add optional Fieldbus capability to the traditional HART-based protocol to extend PlantWeb connectivity.