| Case Study: First BioCon® US Installation |
In the winter of 2007, the first BioCon Biosolids Drying
Plant went online. Since then, the plant has successfully
produced dried biosolids efficiently, with low emissions
and with minimal operator oversight in comparison to
other biosolids treatment technologies |
06/30/2008 |
455.3 KB |
| Video: Heat Transfer Fluids |
Watch this short video for an easy way to check and see if your heat transfer fluids will keep working |
06/25/2008 |
3.75 MB |
| Brochure: AnoxKaldnes™ MBBR (Moving Bed Biofilm Reactor) |
N.A. Water Systems offers the AnoxKaldnes Moving Bed Biofilm Reactor (MBBR) wastewater treatment solution. This patented MBBR is a compact, robust system that is easy to operate with low maintenance requirements |
06/17/2008 |
1.81 MB |
| White Paper: Managing Mobile Business in Economic Downtimes |
White Paper: Managing Mobile Business in Economic Downtimes |
06/13/2008 |
295.1 KB |
| Brochure: W@M Products |
Data concerning a plant and its components is generated right from the first day of planning: in engineering and sizing, in procurement, in installation and commissioning, in operation and maintenance |
06/12/2008 |
855.9 KB |
| White Paper: Metadata Management Reduces Total Installed Cost For Capital Projects |
White Paper: Metadata Management Reduces Total Installed Cost For Capital Projects |
05/30/2008 |
120.1 KB |
| Case History: Debutanizer Overhead Condenser |
BP West Coast Products (Blaine, WA) enlisted the help of CTI Industries to address the unacceptable life expectancy of its original Carbon Steel tubes due to corrosion. |
05/29/2008 |
591.9 KB |
| Case History: Fin-Fan Air Coolers |
Exxon-Mobil (Augusta, Italy) enlisted the help of CTI Industries to improve the reliability of its existing Carbon Steel tubes. |
05/29/2008 |
196.3 KB |
| Case History: Fin-Fan Coolers (12) |
Exxon-Mobil (Southampton, UK) enlisted the help of CTI Industries to address full-length erosion/corrosion due to line content and high velocities. |
05/29/2008 |
482.1 KB |
| Case History: Crude Overhead Fin-Fan Condensers |
BP West Coast Products (Carson, CA) enlisted the help of CTI Industries to rectify the unacceptable mechanical integrity of Carbon Steel tubes due to corrosion. |
05/29/2008 |
197.2 KB |
| Case History: Overhead Fin-Fan Coolers |
Exxon-Mobil (Singapore) enlisted the help of CTI Industries for inlet-end erosion coupled with full-length pitting due to Hydrochloric Acid erosion/corrosion. |
05/29/2008 |
182.6 KB |
| Case History: Fin-Fan Coolers (6) |
Tonen General Sekiyu Sensai KK enlisted the help of CTI Industries for full-length erosion/corrosion including thru-wall pitting. |
05/29/2008 |
697.2 KB |
| List: CTI Shield Repairs |
Sleeving can consist of a Full Length Tube Liner, or in cases of only tube-end erosion/corrosion, a short, metallic tube insert or "Shield". Sleeving material ranges from 300 series stainless steel to Nickel alloys, typically increasing the erosion/corrosion resistance to that of the finned Carbon Steel parent tubes. |
05/29/2008 |
46.6 KB |
| Brochure: Automatic Self-Cleaning Filtration Solutions For The Oil & Gas Industry |
There’s a saying that in order to produce oil, you have to manage your water. Water from a variety sources, including seawater and produced water, can be utilized effectively on offshore oil production platforms and vessels as injection, service or cooling water. But no matter what the source or how it is used, proper filtration is vital to keeping water management cost-effective. |
05/27/2008 |
638.6 KB |
| Datasheet: SCADAPackES Programmable Automation Controller |
The Control Microsystems SCADAPackES augments the industry-renowned SCADAPack controller series with a product that sets a new standard for performance, power and versatility. By offering the power of a 32-bit processor with increased memory, flexible communications and a large I/O set, the SCADAPackES is an advanced solution for challenging applications. |
05/12/2008 |
201.5 KB |
| Datasheet: SCADAPackER Programmable Automation Controller |
The SCADAPackER is the first rack mount system in the SCADAPack family of controllers. Offering flexible solutions in applications requiring high-speed control and monitoring, the SCADAPackER satisfies a wide range of I/O requirements |
05/12/2008 |
452.3 KB |
| Datasheet: SCADAPack E-Series |
The combination of the SCADAPack 300 hardware platform with E-Series firmware brings you the power of native DNP3 and IEC 60870-5 in a cost effective controller. These event driven, time-stamped protocols capture data at the resolution you choose and store it in the controller until polled or reported. Add optional AGA12-2 encryption to DNP3 for additional security and rest assured in your data’s integrity for billable applications or critical operations. |
05/12/2008 |
833.6 KB |
| Datasheet: UV Flame Detector: Model FL3111HT |
The Model FL3111HT is a high temperature rated (125°C) ultraviolet (UV) optical flame detector designed to detect unwanted fires while maintaining false alarm immunity. The FL3111HT detects only in the UV spectral range for optimized speed of response |
05/05/2008 |
105.9 KB |
| Tutorial: SIL 103: SIL Certification Demystified |
Confusion over SIL certification abounds. The IEC 61508 and 61511 standards omit specific requirements regarding SIL certification, inevitably leading to a variety of interpretations. Unfortunately, confusion has been exacerbated by the plethora of agencies, consultants, and product manufacturers who publish conflicting information. With so many inconsistencies in the marketplace, how does an end-user or integrator make sense of what is being communicated and make an educated and reasonable decision? |
05/05/2008 |
32.3 KB |
| Case Study: City Of Sanford, FL |
In order to meet the demand of growth within the
city and to achieve stringent effluent limits, the City
of Sanford worked with CPH Engineers to design the
Sanford South Water Resource Center (WRC), located
in the heart of Central Florida. |
04/30/2008 |
378.0 KB |
| Whitepaper: CeraMem® Ceramic Membrane Technology |
HPD membrane modules are unique, low-cost ceramic membrane products based on the proprietary
CeraMem technology platform |
04/23/2008 |
1.14 MB |
| Brochure: Applicator 10.2 Software |
Selecting the right measuring points can be tedious; often this requires complex calculations and can become a time-consuming task |
04/22/2008 |
1.23 MB |
| Course Catalog: The Oxford Princeton Program (June-December 2008) |
Take advantage of our wide-array of energy, commodity and derivatives training options available worldwide |
04/18/2008 |
364.5 KB |
| Brochure: SgPur™ <i>Sour Gas Purification System</i> |
The sour gas purification system, SgPur, recovers and purifies industrial gases produced in the oil, chemical and steel industries. Gases such as Claus tail gas, refinery flare gas, and coke gas are recovered and purified of the hydrogen sulfide (H2S), while converting the H2S to elemental sulfur |
04/18/2008 |
361.3 KB |
| White Paper: Gas Purification Primer: Advanced Process For Hydrogen Sulfide Removal From Industrial Gases |
In the economic range from about 0.1 to 20 tons sulfur per day, a new process effects the Claus Reaction in a single (pressure) vessel, not unlike the conventional amine acid gas absorption tower. This paper discusses the technology of this new, patented, sulfur purification process that offers clear economic and environmental advantages over current, conventional technologies |
04/18/2008 |
47.5 KB |
