Product/Service

Analytical and Laboratory Benchtop Instruments

Source: Anton Paar USA

Anton Paar USA - Scientific Instrumentation

Anton Paar’s analytical and laboratory instruments ensure the continuous control of product quality and product specifications within tight tolerance limits. A variety of wetted parts, materials and process connections are available to suit each application. A team of application specialists offers expert advice based on long experience, and assists in solving new application tasks.

Request Information

Multiwave GO
For more than 40 years, Anton Paar has been a leading supplier of sample preparation instruments. The latest innovation, Multiwave GO, represents a masterstroke of Anton Paar's engineering. The newly designed and revolutionary Directed Multimode Cavity provides the best of both monomode and multimode microwaves.

Compact Automatic Distillation Unit: ADU 5
Anton Paar has launched the new ADU 5 automatic distillation unit – a fully automated, compact stand-alone distillation unit which is operated by touchscreen interface. This makes it the ideal solution for performing high-precision atmospheric distillation tests.

MCR 702 TwinDrive™ Rheometer
Anton Paar introduces a groundbreaking high-end rheometer in a class of its own: MCR 702 TwinDrive™. For the first time ever in the history of rheometry, rheological tests can be performed with two torque transducers and drive units at once: Two powerful EC motor units in a combined modular setup – flexible and precise enough to deliver any result users are looking for.

Bitumen & Wax Testing
The Penetration is used to measure the resistance which a material under specified test conditions provides against being pierced by a specifically shaped penetrator. Beside the configuration of the penetrator used, prime importance attaches to such factors as temperature, time and load specified by the different standard methods of test.

Flammability Flash & Fire Point Testing
Integrated Fire-Extinguishing System: Automatically controlled by thermocouples or manually released by hand, from external extinguishing gas-supply through a ring-jet covering the test section; as well as additionally potential-free signal-port for e.g. alarm or relay of external fire-extinguishing system.

Penetration & Texture Testing
The Penetration is used to measure the resistance which a material under specified test conditions provides against being pierced by a specifically shaped penetrator. Beside the configuration of the penetrator used, prime importance attaches to such factors as temperature, time and load specified by the different standard methods of test. The Penetrometer PNR 12 is suitable for measurements according various "Bitumen" methods.

Fuel Testing
The Rapid Small Scale Oxidation Test (RSSOT) is a new method to evaluate the storage stability of liquid fuels (gasoline, diesel, biodiesel/FAME & blends), grease or oil.

Microwave Digestion: Multiwave ECO
Multiwave ECO is a quick and convenient microwave digestion system equipped with the lightweight Rotor 16HVT50. This rotor has a superior design for controlled release of overpressure. Multiwave ECO simplifies your routine handling of environmental, food and many other samples.

Microwave ICP Sample Preparation: Multiwave PRO
The Multiwave PRO microwave reaction system delivers the sample preparation solutions you need to obtain excellent trace analysis results, even with complicated, demanding samples.

MCR Modular Compact Rheometer Series
The new MCR rheometers are based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or combination of rheological tests, both in rotational and oscillatory mode, are possible with the MCR rheometers.

HPA-S - High Pressure Asher
Anton Paar has developed and produced sample preparation instruments to the highest standards for over 30 years. In 1973, the introduction of the "VAO", the world's first automatic wet decomposition device, marked the beginning of a successful cooperation between Anton Paar GmbH and Prof. Günter Knapp at the University of Technology in Graz. Since then, professional, high-performance instruments have been developed for plasma ashing, oxygen combustion, high pressure digestion and for microwave-supported decomposition.

DMA Generation M | Abbemat RXA
In quality control and research work in numerous industries, knowledge of the density and refractive index is essential for identifying and characterizing samples.

DMA 500 Density & Concentration Meter
Density measurement of liquids and gases is a proven method for analysis and quality control in numerous industries. It enables you to reliably determine product-specific parameters and concentrations of binary mixtures.

The Xsample Series
The Xsamples 22, 122, 52, 352, 452, 352 H and 452 H have been designed especially for the sample handling of Generation M master instruments and their broad range of applications.

Abbemat Refractometer Series
Anton Paar offers a range of Abbemat refractometers which embody four decades of technical know-how.

Monowave 300 Microwave Synthesis For Research & Development
Monowave 300 provides a completely new and sophisticated approach towards microwave synthesis, turning previously unachievable reliability and performance into three-dimensional fact.

Masterwave BTR Microwave Synthesis In The Kilolab
Based on a revolutionary new technique, the all-new Masterwave BTR benchtop reactor for the first time transfers microwave synthesis to the kilolab.

DMA 5000 M Density Meter
The density meter DMA 5000 M provides unparalleled ease of use and complete transparency and traceability of the sample filling and measurement process. DMA 5000 M is the most accurate density meter on the market and is ideal for numerous applications. Digital density measurement with DMA 5000M is used, for example, in industrial quality control, research, at authorities and standards organizations.

Modular Circular Polarimeter: MCP 200
The MCP 200 series of polarimeters provides accurate measurements of the optical rotation of liquids at an economic price. It utilizes the latest technology to ensure high measuring accuracy with great ease-of-use.

SVM 3000: Stabinger Viscometer
The SVM 3000 works according to a new, patented (EP 0 926 481 A2) measuring principle. Just fill the measuring cell with 3 ml of sample and obtain both dynamic and kinematic viscosity and density values. The viscosity index calculation is also integrated.

ABBEMAT® High Performance Automatic Refractometers
The ABBEMAT® refractometers have gained a world-wide reputation for their high performance and accuracy. The new generation of instruments continues this tradition, utilizing the latest progress in opto-electronics and data processing technology.

Asphalt Rheometer: SmartPave
The SmartPave dynamic shear rheometer (DSR) is based on the technology of Physica MCR rheometers with the established EC motor system. SmartPave incorporates innovative features like the Toolmaster™, a Peltier temperature device for dry sample heating, and step-by-step instructions for measuring procedures according to AASHTO TP5. The SmartPave rheometer takes asphalt rheology to previously unattained levels of accuracy, comfort, and ease of use.

DMA 4100/4500/5000 M
The DMA 4500 M provides unparalleled ease of use and complete transparency and traceability of the sample filling and measurement process. You can be sure that your sample filling and measurement are being performed correctly and have complete confidence in the outstanding quality of your results.

DMA 35: Portable Density Meter
The DMA 35 portable density meter measures the density and concentration of your sample and is characterized by the highest level of user friendliness. Its robust and lightweight design enables the use in numerous fields of application and its on-site operation in a wide range of work environments.

Powder Cell
The new Powder Cell from Anton Paar for the renowned MCR rheometer series brings the full array of traditional rheological methods to the field of powder. Now it is possible to simulate and determine powder flow under different conditions. This is important in the field of quality control, but also to investigate dry granular flow, especially in the fluidized or near-fluidized state. An MCR rheometer plus Powder Cell is the perfect combination for true rheological investigations of powders in quality control as well as research and development.

Abbemat Heavy Duty Refractometers
Technology leader Anton Paar launches two new high-performance refractometers: Abbemat 450 and 650. The instruments combine extraordinary robustness with high precision up to ±0.00002 nD to measure the refractive index under harsh conditions.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information