News | October 30, 2014

Intermoor Completes Red Hawk Spar Decommissioning Contract

image

InterMoor, an Acteon company, has successfully completed its contract supporting the decommissioning of Anadarko Petroleum Corporation’s Red Hawk spar in the Gulf of Mexico.

The Red Hawk spar is the deepest floating production platform to date to be decommissioned in the Gulf of Mexico. It is also the first spar decommissioned in the “Rigs-to-Reefs” programme, which required the spar to be laid down on its side on the seafloor.

Work was split between the original spar site at Garden Banks, block 876, in the Gulf of Mexico, at a depth of 5,200 ft., and the reefing site at Eugene Island, block 384, at a depth of 430ft.

InterMoor developed the engineering procedures and performed the work to disconnect the mooring lines from the floating facility. The company also ballasted the hull prior to and during the topsides removal and deballasted it to prepare the hull for towing. Ballasting and deballasting were performed from a nearby derrick barge. The spar was then towed to the reefing site where it was flooded and laid on the seabed in a controlled manner. Finally, InterMoor recovered the mooring lines and assisted with the as-laid survey of the reefing site.

Dusan Curic, project manager at InterMoor, said, “Through thorough engineering and efficient offshore operations InterMoor enabled Anadarko to facilitate the safe and efficient removal of the platform. Multiple departments were involved - Project Management, Project Engineering, Advanced Analysis Group, Subsea Group, Operations, and Shore Base. We also managed multiple subcontractors throughout the project. InterMoor expanded its services to include ballasting and deballasting to allow for a more comprehensive life-of-field solution for its clients.”

The project represents InterMoor’s first work in ballasting and deballasting, and builds on the company’s growing decommissioning experience

InterMoor, an Acteon company, is the leading mooring, foundations and subsea services provider delivering innovative solutions for rig moves, mooring services and offshore installation projects. We support operators and contractors worldwide with our engineering, fabrication, shore base, survey and positioning, and inspection services to truly provide customised solutions that reduce cost, time and risk. For more information, visit www.intermoor.com.

About Acteon
Acteon companies provide mooring, foundation, riser, conductor, flowline and marine electronics products and services supported by strong engineering and project management capabilities. Acteon’s companies are 2H Offshore, Aquatic, Claxton, Conductor Installation Services (CIS), Core Grouting Services, Fluke Subsea, InterAct, InterMoor, J2 Subsea, LDD, LM Handling, MENCK, Mirage Machines, NCS Survey, Offshore Installation Services (OIS), Probe Oil Tools, Pulse Structural Monitoring, Seatronics, Subsea Riser Products (SRP) and TEAM Energy Resources. For more information, visit www.acteon.com

About subsea services
Subsea services are defined as the provision of specialist equipment, services and personnel that can operate from any fit-for-purpose vessel or platform. Acteon’s subsea services offering is unique and addresses operational requirements that support oil and gas asset owners, construction and drilling companies, and vessel owners

SOURCE: InterMoor