Newsletter | November 13, 2019

11.13.19 -- Oil And Gas Discovery In The North Sea


In This Issue:

Featured Articles
Spent Caustic Treatment: The Case For Wet Air Oxidation Over Incineration
A Q&A With Siemens Energy, Inc. - Water Solutions

In the Middle East, incineration is a popular method for treating spent caustic, the harsh byproduct of ethylene production. However, incineration can be problematic when treating wastewater with a high total dissolved solids content. Wet air oxidation (WAO) offers a solid alternative with potentially lower overall lifecycle costs.

High-Pressure Feedwater Heater Repair — TVA Presentation
By CTI Industries

This paper discusses the failures, investigative techniques, probable root causes, and corrective measures evaluated and implemented to extend the service life of high-pressure feedwater heaters at TVA's Allen Fossil Plant.

Plunger Lift Application
By ABB Measurement & Analytics
The ABB Plunger Lift Application is built around customer-driven, tried and true options. When combined with ABB’s other built-in applications for measurement and control, we can provide you with the largest selection available and an all-in-one solution.
Recommended Resources
Pulsar Model RX5 Pulse Burst Radar Transmitter

The Pulsar Radar transmitter is the latest generation of loop-powered, 24 VDC, level transmitters. It has lower power consumption, faster response time, and is easier to use than most loop-powered radar transmitters.

Abbemat Refractometer Series

Abbemat refractometers are compliant with 21 CFR Part 11 as well as international standards such as ASTM, ICUMSA, OIML, AOAC, DIN/ISO, FDA, ISI, JIS, and pharmacopoeias.

Wafer-Cone Flow Meter

The Wafer-Cone flow meter is a differential pressure type flow measurement device. A cone is positioned in the center of the pipe to increase the velocity of the flowing fluid and create a differential pressure. This pressure difference can be measured and used to accurately interpret flowrate.