Product/Service

Sound Velocity Sensors For Aggressive & Corrosive Liquids

Source: Anton Paar USA

Sound Velocity Sensors For Aggressive & Corrosive Liquids

These sound velocity sensors are used for aggressive and corrosive liquids. They continuously monitor the product quality of liquids during production. Depending on the sensor, the concentration is either calculated, displayed and processed by an Anton Paar evaluation unit or calculated inside the sensor and provided as a 4-20mA signal.

Request Information

These sound velocity sensors are used for aggressive and corrosive liquids. They continuously monitor the product quality of liquids during production. Depending on the sensor, the concentration is either calculated, displayed and processed by an Anton Paar evaluation unit or calculated inside the sensor and provided as a 4-20mA signal.

Typical Applications

  • Inline concentration measurement interfaces of e.g. sulfuric acid
  • Phase separation
  • Inline measurement of liquid purity
  • Inline detection of liquid

Robust design and features

  • Inline installation, fork-type sensor
  • Wetted parts: Hastelloy C276 or Monel 400, Gold
  • L version (long shaft: 100 mm) for installation in tanks
  • 2T sensors: stable measurement values at production stop, high gas bubble tolerance
  • Different flanges available

For efficient production

  • Short response time
  • Detection of smallest deviations
  • Profibus option

Industries

  • Chemistry
  • Steel
  • Oil
  • Paper, Textiles
  • Environmental

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information