5.5 in. Casing Tong
Source: FARR Canada Ltd.
Torque range at 2000 PSI/13.8 Mpa (based on M75 X 2.5" Motor)<
Torque range at 2000 PSI/13.8 Mpa (based on M75 X 2.5" Motor)
High gear 2,000 ft.lbs/2,700 Nm
"Low gear 10,000 ft.lbs./13,560 Nm"
5.5" Tong also available for:
18,000 lbs.
Maximum RPM at 50 GPM/189 LPM
High: 90 RPM
Low: 18 RPM
Hydraulic Requirements
50 GPM @ 1,000 PSI
189 LPM @ 6.9 Mpa
30 GPM @ 2,000 PSI
113 LPM @ 13.8 Mpa
Length
50 inches/127 cm
Overall Width
24 inches/60.96 cm
Space required on pipe
6.75 inches/17.14 cm
Maximum elevator diameter
Unlimited (tong comes off pipe)
Center line of pipe to center line of anchor handle
36 inches/91.44 cm
Weight (tong only)
840 lbs./378 kg
Jaws available for Tubing and casing Sizes (inches)
2.375, 2.875, 3.5
High gear 2,000 ft.lbs/2,700 Nm
"Low gear 10,000 ft.lbs./13,560 Nm"
5.5" Tong also available for:
18,000 lbs.
Maximum RPM at 50 GPM/189 LPM
High: 90 RPM
Low: 18 RPM
Hydraulic Requirements
50 GPM @ 1,000 PSI
189 LPM @ 6.9 Mpa
30 GPM @ 2,000 PSI
113 LPM @ 13.8 Mpa
Length
50 inches/127 cm
Overall Width
24 inches/60.96 cm
Space required on pipe
6.75 inches/17.14 cm
Maximum elevator diameter
Unlimited (tong comes off pipe)
Center line of pipe to center line of anchor handle
36 inches/91.44 cm
Weight (tong only)
840 lbs./378 kg
Jaws available for Tubing and casing Sizes (inches)
2.375, 2.875, 3.5
FARR Canada Ltd., 14755 - 121A Avenue, Edmonton, AB T5L 2T2. Tel: 780-453-3277; Fax: 780-455-2432.