8.625 in. Tong for Casing, Tubing and Drill Pipe
Source: FARR Canada Ltd.
Torque range at 2000 PSI/13.8 Mpa
Torque range at 2000 PSI/13.8 Mpa
High gear 5,000 ft.lbs/6,780 Nm
"Low gear 25,000 ft.lbs./33,900 Nm"
Maximum RPM at 50 GPM/189 LPM
High: 48 RPM
Low: 9 RPM
Hydraulic Requirements
50 GPM @ 1,000 PSI
189 LPM @ 6.9 Mpa
10 GPM @ 2,000 PSI
37.8 LPM @ 13.8 Mpa
Length
56 inches/142.24 cm
Overall Width
30 inches/76.20 cm
Space required on pipe
8 inches/20.23 cm
Maximum elevator diameter
Unlimited (tong comes off pipe)
Center line of pipe to center line of anchor handle
36 inches/91.44 cm
Weight (Approximate)
12,000 lbs./540 kg
Jaws available for Tubing and casing Sizes (inches)
2.875, 3.5, 4, 4.5, 5, 5.5, 6.625, 7, 7.625, 7.75, 8.625
FARR Canada Ltd., 14755 - 121A Avenue, Edmonton, AB T5L 2T2. Tel: 780-453-3277; Fax: 780-455-2432.