Antifreeze/Coolants
Shell Rotella ELC Extended Life Coolant/Antifreeze is a single-phase, ethylene glycol type, heavy-duty diesel engine coolant based on a patented extended life carboxylate corrosion inhibitor system with nitrite and molybdate.
Shell Rotella ELC Extended Life Coolant System
Shell Rotella ELC Extended Life Coolant/Antifreeze is a single-phase, ethylene glycol type, heavy-duty diesel engine coolant based on a patented extended life carboxylate corrosion inhibitor system with nitrite and molybdate. Shell Rotella ELC Extended Life Pre-Diluted 50/50 Coolant/Antifreeze is a 50/50 mixture of Rotella ELC with deionized water. Shell Extender is the prescribed recharge for Shell Rotella ELC Extended Life Coolant/Antifreeze. It is recommended that only the Coolant/Antifreeze be used for initial fill and top-off. Use Shell Rotella ELC Extended Life Coolant/Antifreeze to adjust the freeze point as required by ambient conditions.
Shell Rotella ELC Extended Life Coolant/Antifreeze is a single-phase, ethylene glycol type, heavy-duty diesel engine coolant based on a patented extended life carboxylate corrosion inhibitor system with nitrite and molybdate. Shell Rotella ELC Extended Life Pre-Diluted 50/50 Coolant/Antifreeze is a 50/50 mixture of Rotella ELC with deionized water. Shell Extender is the prescribed recharge for Shell Rotella ELC Extended Life Coolant/Antifreeze. It is recommended that only the Coolant/Antifreeze be used for initial fill and top-off. Use Shell Rotella ELC Extended Life Coolant/Antifreeze to adjust the freeze point as required by ambient conditions.
Benefits
- 300,000 miles on-road use (three years or 6,000 hours off-highway use) on initial fill
- Additional 300,000 miles on-road use (three years or 6,000 hours off-highway use) by adding Shell Extender
- Easy maintenance
- No inhibitor level testing required
- Excellent pitting protection for wet sleeve cylinder liners
- Effective, long term corrosion protection for aluminum, brass, cast iron, steel, solder, and copper
- Improved water pump seal life due to reduced water pump seal wear resulting from fewer dissolved solids
- No silicate drop-out or gel formation during use or storage
- Excellent heat transfer
- Reduced hard water scale
- Superior protection in high operating temperatures
- Protects against winter freeze-up and summer boil-over
- Outstanding hot surface aluminum protection
- Suitable for gasoline powered automotive and industrial engines
- Compatible with conventional antifreeze. Dilution with conventional antifreeze, however, will reduce extended life benefits. Shell recommends that this product not be diluted by more than 10% with conventional coolants
- Can be used to top up systems with conventional coolant, but SCAs must continue to be added.
Equilon, 1111 Bagby, Houston, TX 77002. Tel: 713-752-7642. Fax: 713-752-4678.
This website uses cookies to ensure you get the best experience on our website. Learn more