Product/Service

Casing Tongs Model Dual 3500

Source: FARR Canada Ltd.
Model Dual 3500 with Hydraulic Back-up for Snubbing Rigs and Dual Completions
Dual Casing Tongs from FARR Canada Ltd., Edmonton, Alberta, Canada have Hydraulic Back-up for Snubbing Rigs and Dual Completions.
3.5 in. Casing Tong

Torque range at 2000 PSI (Based on M25X2' Motor)
High gear 1,550 ft.lbs/2,107 Nm
"Low gear 4,300 ft.lbs./5,800 Nm"
Special Request Tongs can be manufactured to output of:
5,000 ft.lbs/6,780 Nm
Maximum RPM at 40 GPM/151 LPM
High: 105 RPM
Low: 37 RPM
Hydraulic Requirements
40 GPM @ 1,000 PSI
151 LPM @ 6.9 Mpa
18 GPM @ 2,000 PSI
68 LPM @ 13.8 Mpa
Length
31 inches/78.74 cm
Overall Width
14 inches/35.56 cm
Height
23.375 inches/59.37 cm
Center line of pipe to center line of anchor handle
22 inches/58.88 cm
Weight (approximate)
400 lbs./182 kg
Jaws available for Tubing and casing Sizes (inches)
1.90, 2.0625, 2.325, 2.875, 3.5
Sucker Rod Sizes (inches)
0.625 thru 1.125
Other jaw sizes available on special order.

FARR Canada Ltd., 14755 - 121A Avenue, Edmonton, AB T5L 2T2. Tel: 780-453-3277; Fax: 780-455-2432.