Product/Service

Coiled Tubing Side Door Stripper/Packer

Source: Vanoil Equipment Incorporated
The side door stripper/packer is designed to pack-off around coil tubing being stripped in or out of the well bore
Surface Pressure Equipment - Coil Tubing

Side Door Stripper/Packer
The side door stripper/packer is designed to pack-off around coil tubing being stripped in or out of the well bore. The tool allows easy access to the packer, primary seal and bushing. These can be replaced under pressure with the coil tubing still in the well. The tool is installed above the coil tubing BOP.

Well pressure is sealed-off by actuating the hydraulic cylinder to the extended position. This causes the packer cylinder sleeve to push against the packer. The packer is squeezed to form a seal around the tubing. Interchangeability of the bushing and packer allows one tool to be used with coil tubing.

The sidedoor stripper/packer is available in working pressures 5000 PSI to 10000 PSI for standard and sour service environment.

Vanoil Equipment Incorporated, Bay 1, 8075 49 Avenue, Red Deer, AB T4P 2V5. Tel: 403-347-8280; Fax: 403-347-8281.