Model SH-4600 HYDRAULIC POWER TONG
Source: FARR Canada Ltd.
featuring sliding head jaw system
complete with wraparound dies
complete with wraparound dies
featuring sliding head jaw system
complete with wraparound dies
Size Range
2-3/8" - 4-1/2" O.D.
Torque Rated
10,000 FT. LBS.
Torque range at 2000 PSI/ 13.8 Mpa:
High Gear : 2,100 ft. lbs. / 2,985 Nm
"Low Gear : 10,000 ft. lbs. / 13,567 Nm"
complete with wraparound dies
Size Range
2-3/8" - 4-1/2" O.D.
Torque Rated
10,000 FT. LBS.
Torque range at 2000 PSI/ 13.8 Mpa:
High Gear : 2,100 ft. lbs. / 2,985 Nm
"Low Gear : 10,000 ft. lbs. / 13,567 Nm"
Maximum RPM at 40 GPM / 141 LPM:
High: 75 RPM
LOW: 16 RPM
Hydraulic Requirements
40 GPM @ 1,000 PSI / 151 LPM @ 6.9 Mpa
"18 GPM @ 2,000 PSI / 68 LPM @ 13.8 Mpa"
Length
35 INCHES / 88.9 Cm
Overall Width
24 INCHES / 60.96 Cm
Space Required on Pipe
5-1/4 INCHES / 13.34 Cm
Maximum elevator diameter
UNLIMITED (Tong comes off pipe)
Center line of pipe to center line of anchor handle
24 INCHES / 60.96 Cm
Weight
650 LBS. / 295.1 Kg.
Jaws available for tubing sizes
1.050", 1.315",1.660", 1-3/4", 1.90", 2", 2-3/8", 2-7/8", 3-1/2", 4" and 4-1/2
Sucker rod sizes
5/8" to 1-1/8
FARR Canada Ltd., 14755 - 121A Avenue, Edmonton, AB T5L 2T2. Tel: 780-453-3277; Fax: 780-455-2432.