Underground Fiberglass Oil/Water Separators Model UL 2215, UL CSI-10
Source: Containment Solutions, Inc.
Our performance-proven fiberglass underground storage tank provides the base for our fiberglass underground oil/water separators
Our performance-proven fiberglass underground storage tank provides the base for our fiberglass underground oil/water separators.
The UL 2215 is a premium performance oil/water separator. The UL 2215 meets not only basic construction requirements for the holding vessel but has undergone PERFORMANCE TESTING of the actual OWS product line under simulated operating conditions.Fiberglass Construction means corrosion resistance without coatings or protection systems.
Enhanced Coalescer System includes M-shaped Oleophilic inclined corrugated parallel plates to maximize separation and solids drop out.
Design minimizes maintenance requirements.
Removable plates simplify cleaning process when necessary.
30-year internal and external corrosion and structural warranty assures long term performance.
Full line of accessories including electronics and pump out systems makes specifying and system design easier.
UL 1316 designed vessel meets the stringent performance requirements of UL 1316.
UL 2215 listing provides independent verification of performance of the OWS.
Available in single-wall and double-wall construction.
Sizes ranging from 600 to 15,000 gallon capacities
Flow rates ranging from 45 to 1735 gpm.
In over 250,000 tank installations throughout the world, there has not been a single leak due to internal or external corrosion!
Performance Features:
The UL 2215 is a premium performance oil/water separator. The UL 2215 meets not only basic construction requirements for the holding vessel but has undergone PERFORMANCE TESTING of the actual OWS product line under simulated operating conditions.
Features:
In over 250,000 tank installations throughout the world, there has not been a single leak due to internal or external corrosion!
Performance Features:
- Removes free floating oils and settleable solids for oil/water mixtures to achieve an effluent quality not to exceed 10 ppm (mg/L) of free hydrocarbons (or 15 ppm if specified).
- Removes free oil droplets required to achieve 10 ppm or 15 ppm effluent quality.
- Includes a 30-year internal and external corrosion warranty.
- Includes a 30-year structural warranty when installed according to CSI installation instructions.
- Carries a one-year workmanship and materials warranty on internal separator components and coalescer plates, supports, etc.
All CSI Oil/Water Separator Tanks are designed and tested in accordance with the following criteria:
- Stokes law
- The API manual on disposal of refinery wastes
- API bulletin no. 1630 first edition
- API bulletin no. 421
- UL-1316
- ASTM D-4021
- EPA Test Methods 413.1 & 413.2
- US Coast Guard 46CFR 162.050
Containment Solutions, Inc., 5150 Jefferson Chemical Road, Conroe, TX 77301-6834. Tel: 936-756-7731; Fax: 936-756-7766.
This website uses cookies to ensure you get the best experience on our website. Learn more