Featured Products

  1. FS10A Analyzer Flow Switch / Monitor 2/29/2016

    The FS10A is a universal flow switch and monitor specifically designed for gas and liquid process analyzer sampling systems.

  2. PACT® Biological Treatment Systems 2/29/2016

    The PACT system combines biological treatment and carbon adsorption into a single, synergistic treatment step, resulting in significant cost savings and performance advantages over other systems.

  3. Hydrocell® Hydraulic Induced Air Flotation Separator 2/29/2016

    Hydrocell™ hydraulic induced air flotation separators remove oil and suspended solids from water in large volumes, and can process solids and oils from 50 ppm to several hundred ppm with product effluents containing less than 5 ppm.

  4. Folded Flow® Dissolved Air Flotation Separator 2/29/2016

    The Folded Flow® DAF system’s simple and innovative design “folds” the flow by removing effluent from the same end of the tank as the influent is introduced, resulting in a higher hydraulic loading rate.

  5. Corrugated Plate Separators (CPS) 2/28/2016

    Corrugated Plate Separators (CPS’s) provide economical and effective removal of oil and solids from wastewater by gravity, in a smooth, efficient automatic flow. With thousands of installations in operation, this proven design has no moving parts and provides consistent operating results for simple and better separation.

  6. GAA630-M Emission Monitoring System 1/26/2016

    The GAA630-M is based on a dry and extractive approach. The system is designed as a two housing solution. The continuous gas analyzers are engineered to fit in a small footprint IP65 compact cabinet, while the sampling system is mounted in a separate IP65 enclosure. The design complies to IMO MARPOL ANNEX 14 Res. MEPC 177 (58) (NTC) & IMO MARPOL ANNEX 9 Res. MEPC 184 (59). The sampling system is based on a continuous extraction cooling device, removing the moisture from the sample gas. Both cabinets are equipped with antivibration devices to reduce vibrations effects, maximize measuring performance and extend lifetime of the analytical and pneumatic components

  7. GAA330-M Emission Monitoring System 1/26/2016

    The GAA330-M is a CEM system designed to measure the gas pollutants SO2, CO2, and NOX, as specified in MARPOL Annex VI. The GAA330-M operates with both high- and low-sulfur fuels, no matter if you are operating outside or inside an ECA. ABB has the right gas analyzer portfolio to allow vessels to stay compliant with current and upcoming regulations. The GAA330-M uses an Infrared photometer for reporting the SO2/CO2 ratio as specified by MARPOL requirements. NOX is monitored with an ultraviolet photometer (UV) which is the most practical approach. ABB photometers are manufactured and designed for best performance under harshest conditions with an installed base of more than 100.000 units in global industries.

  8. HP30 Process Hydrogen Analyzer 1/11/2016

    The HP30 Process Hydrogen Analyzer is intended for installation and use in refinery and petrochemical plant environments for the monitoring of hydrogen recycle and hydrogen make-up process streams.

  9. Cell Viability Analyzer: Vi-CELL XR 12/22/2015

    The Vi-CELL Series Cell Viability Analyzers provide an automatic and cost effective means to perform the trypan blue dye exclusion method.

  10. Flow Cytometer With Maximum Flexibility: CytoFLEX 12/22/2015

    Providing quality and performance at any configuration, the CytoFLEX system provides powerful sensitivity and resolution for the simple to the most challenging applications. CytoFLEX delivers and surpasses capabilities expected in top tier analyzers, with excellent performance and nanoparticle resolution.